Ningbo MOS Group Co., Ltd
Add: Zhuangshi, Ningbo, China
Tel: +86-571-56835049
Fax: +86-571-88914025
P.C: 315201

Taking bearings Skillfully

After bearing damage at the end of generators, it will be difficult to remove if it does not have the right tools. At this time, first generator on the back, Dial was working on the stage, the soft pad of wood or pieces of cloth, bearing in the back, Dial added amount of butter, then cut into pieces of rags some bearing at the end of the Between the cover. Joined the smaller the pieces of cloth, the better, when the bearings back, Dial and the relatively large space, they can continue to increase the cloth. Good first cut pieces of cloth on the accession to the butter, and then look for bearing with a diameter of more or less the same diameter and one end of the round or flat screwdriver, hammer and percussion round pieces of cloth and kept adding butter And pieces of cloth, bearing the gap between the cover and will continue to increase until the bearing out.
You are welcome to visit our website to get more information.

Author:mosbearing   2008-10-17   Source:    View(1417)     Comment(0)

Comments (0)


Username:   not register
Password: (guest)
Validation code:   
URL: http://