Username:
Password:
 

Ningbo MOS Group Co., Ltd
Add: Zhuangshi, Ningbo, China
Tel: +86-571-56835049
Fax: +86-571-88914025
P.C: 315201
Email: mos.bearing@hotmail.com

High-temperature bearing steel


High-temperature bearing steel


Typically, the operating temperature at 150
over the use of bearings known as the high-temperature bearings. As the chromium bearing steel in the use temperature exceeds 150 ~ C, its hardness will be a sharp decline, size, instability, and lead to bearing not work correctly. So for the working temperature 150 ~ E ~ 250 work under conditions of bearings, if the rings and rolling bodies still use an ordinary high carbon chromium bearing steel, it must be right to conduct a special tempering bearing parts handling, should generally be higher than the Work carried out under the tempering temperature of 50 . After tempering treatment according to the above requirements bearing steel, able to work under the normal use temperatures. But a decrease of hardness after tempering, bearing life decreased. When the bearing operating temperature is higher than 250 , then must use high-temperature bearing steel.
In addition to high-temperature bearing steel bearing steel should have a normal performance, we must also have a certain high-temperature hardness and high wear resistance, high temperature contact fatigue strength, oxidation resistance, high-temperature impact resistance and high temperature dimensional stability. Commonly used in high-temperature bearing steel are:
Molybdenum steel: Cr4M04V, Crl5M04, 9Crl8Mo, Crl4M04;
Tungsten Steel: W9Cr4V2Mo, W18Cr4V;
Tungsten molybdenum: W6MoSCr4V2.
High-temperature bearing steel W, Cr, V, Mo and so can form insoluble carbide under high temperature, and tempering time can be dispersed carbide precipitation, resulting in secondary hardening effect, so that such steel under certain temperature still has a more high hardness, wear resistance, strong anti-oxidant properties, high fatigue resistance and dimensional stability. High-temperature bearing steel of which the Cr4M04V and W18Cr4V most commonly used.

 

Regards,

 

deep groove ball bearings, thin wall miniature bearings, industrial miniature bearings,industrial equipment bearings, house appliances bearings,office appliances bearings ,medical appliances bearings, automobile bearings manufacturer MOS group


Source: 3721bearing

You're welcome to visit deep groove ball bearings manufacturer:MOS group website to get more information and to interact with ushttp://www.deepgroove-ballbearings.com/



Author:mosbearing   2009-12-23   Source:    View(749)     Comment(0)

Comments (0)


Comment:

Username:   not register
Password: (guest)
Validation code:   
E-mail:
URL: http://
Content: